How to change bathroom countertops?

You can completely transform the appearance of your bathroom by replacing the granite countertops. Changing the bathroom granite countertops for a more modern one is an easy way to update the look of an outdated bathroom. However, you should know a few important things about countertops before you decide to replace them.

Start with the correct height of countertops

What is the height of a standard bathroom countertop? A question arises in many people’s minds: how to clean bathroom countertops? In addition, it depends on the height of the person. There is a general consensus that the size of granite countertops for a bathroom should be at least 30 inches. However, many people find this to be too small. Therefore, you should use 32-inch countertops, which will allow most people to use the sink comfortably.

Gather the essentials

After picking a good choice for bathroom countertops, these are some things you need to change countertops.

  • Hammer
  • Chisel
  • Pad sander
  • Level
  • Shims
  • Drain tailpiece
  • Tape measure
  • Screwdriver
  • Adjustable pliers
  • Wrench
  • Utility knife

How to Remove and Replace Bathroom Countertops

1. Measure the vanity top

Use a tape measure to measure the existing granite countertops. You should keep the same dimensions, but you might choose one that’s a little bigger if more space is available.

2. Turn off the water supply to the plumbing

Take off the doors with a screwdriver so that you can operate inside easier. Then, turn off the flow of water from the supply valve.

In order to remove the compression nuts at both ends of the drain, you need to remove them. If you wish to remove the shutoff valves from the faucets, you will need an adjustable wrench.

3. Remove caulk from the walls

Use a sharp knife to cut the caulk around the vanity top edges. Carefully avoid damaging the drywall.

4. Pry off the old vanity top

The top of granite countertops often has fasteners underneath the surface of the vanity top that can be easily removed with a screwdriver. As a matter of fact, vanity tops are usually glued to the cabinet, and that glue needs to be broken.

After removing the front and sides of the vanity, insert a pry bar and lift the top-up.

5. Clean bathroom countertops

People always wonder how to clean bathroom countertops completely. Remove all caulk and adhesive from the cabinet top edge with a chisel or pad sander. Using a putty knife, scrape off strings of caulk from the wall.

6. Install the new vanity top

Set up the new vanity top on the cabinet. After selecting, adjust levels with shims if necessary.

We are often asked how to paint bathroom countertops? It is very easy to paint. There are three steps of how to paint bathroom countertops:

  • Preparation 

Preparing the surface includes cleaning it thoroughly with soap and water.

  • Priming

Priming protects the surface from moisture penetration while providing a smoother surface for painting.

  • Painting

Finally, applying paint on the primed surface will give it a clean look and protection from wear and tear.

7. Install the sink and faucet

As directed by the manufacturer, secure the sink and faucet to the new vanity top with the hardware provided. At last, fix the water supply lines to the faucet inlets and install the sink drain assembly.

Professional services are the best bet!

Is changing bathroom countertops as easy as it seems? Certainly not! While this article does provide a brief guideline for a DIY job, it is your best bet to pick reliable professionals for this service.

Pro Granite Orlando holds a team of experts for bathroom countertops who have been in the industry for 15 years. We offer clients the best quality of countertops services. Further, we are available 24/7. So, call us now for a hassle-free service of changing bathroom countertops.